Blauberg Mix-E 450-4E
Inline mixed-flow fans in metal casing. Maximum air capacity up to 6385 m³/h.
EAN4058448028267
- Description
- Characteristics
- Capacity diagram
- Downloads
- Designation key
- Dimensions
Description
Description
USE | |
The units can be used for ventilation of residential, public and industrial spaces. |
|
DESIGN | |
The fan casing is made of steel sheets with a polymer coating.The mounting brackets on the casing enable a variety of installation configurations.The fan casing is equipped with an external water-tight terminal box for electrical connections. | |
MOTOR | SPEED CONTROL |
The fan motor shaft is mated to an impeller with diagonal blades.The units are equipped with single-speed 4-pole single-phase or threephase motors.The motors have thermal contacts built into the coils for overheating protection. | Infinitely variable or stepped speed regulation is provided by means of athyristor or autotransformer controller.Several fans may share the same controller provided that the combined power output and operating current are within the controller ratings. |
MOUNTING | |
The fans can be installed at the inlet or outlet of the ductwork or in the middle. The ducts can be fitted at any angle relative to the fan axis.A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure. |
Characteristics
Characteristics
Parameter | Mix-E 450-4E | Measurement unit |
---|---|---|
Voltage | 230 | V |
Phase | 1 | ˜ |
Frequency | 50 | Hz |
Current | 7.72 | A |
Power | 1200 | W |
RPM | 1475 | min-1 |
Maximum air flow | 1774 | l/s |
Maximum air flow | 6385 | m³/h |
Sound pressure level at 3 m | 65 | dBА |
Transported air temperature | -25...+60 | °С |
Motor IP rating | IP44 | - |
Ingress protection rating | IPX4 | - |
EC motor | no | - |
Casing material | polymer-coated steel | - |
Outdoor mounting | no | - |
Sound-insulated casing | no | - |
Air duct | for round air ducts | - |
Connection diameter | 450 | mm |
Design | mixed-flow | - |
Weight | 35 | kg |
Mounting | Inline | - |
ErP | 2016 | - |
Capacity diagram
Capacity diagram
- Selection method:
- Air capacity:
- Pressure:
Operating point
- Air capacity: --
- Pressure: ---
Documents archieve
Documents archieve
Select a document type
Designation key
Designation key
Series | Spigot diameter [mm] | Моtor | ||
Number of poles | Phase | |||
Mix-E | 355; 400; 450; 500 | - | 4 | E: single-phase D: three-phase |
Dimensions
Dimensions
Type | Dimensions [mm] | ||||||||||
ØD | B | B1 | DK | H | K | L3 | |||||
Mix-E 450-4E | 447 | 975 | 80 | 705 | 610 | 675 | 60 |