Blauberg SE Vento Expert W
- Description
- Characteristics
- Downloads
- Dimensions
Description
Description
Features | Design |
The SE Vento Expert W control panels are used with Vento Expert W V.2 energy recovery single-room ventilation units.
The control panel provides control over the basic operating modes of the units.
The ventilators are connected to the control panel over Wi-Fi.
|
Casing made of high-quality plastic.Glass sensor operating panel with touch buttons with light indication.IP40 ingress protection rating. |
Control panel functions | |
Installation and connection | |
The SE Vento Expert W panels can be attached to a wall surface or concealed in a wall. To enable these mounting configurations, the units are delivered with EDR-I 1 (in-wall) and EDR-E 5 (surface) mounting boxes. | Connection of the control panel is carried out according to the User’s manual of the unit. |
Characteristics
Characteristics
Parameter | Measurement unit | |
---|---|---|
Voltage | 110–230/50 (60) Hz | V |
Cable type | 2 × 0.35 | mm² |
Maximum current | 0.012 | A |
Sensor surface material | Glass | - |
Operating humidity range | 10 – 80 (no condensation) | % |
Operating temperature range | +10…+45 | °С |
Ingress protection rating | IP40 | - |
Weight | 0.19 | kg |
Casing material | plastic | - |
Standard | IEEE 802.11 b/g/n | - |
Frequency band | 2.4 | GHz |
Transmission power | 100 (+20) | mW (dBm) |
Network | DHCP | - |
WLAN safety | WPA, WPA2 | - |
Documents archieve
Documents archieve
Select a document type
Dimensions
Dimensions