Domestic fans
Industrial fans
Single-room air handling units with heat recovery
Air handling units 
Smoke extraction and ventilation
Ventilation accessories
Ventilation ducts and fittings
Air distribution
Measurement and control technology
Ventilation sets and ventsBlauberg VENTO Eco2 A50 S1(S9) Pro
Single-room heat recovery units. Maximum air capacity up to 50 m³/h.
EAN4058448001260 - Description
- Characteristics
- Downloads
- DIMENSIONS
- Accessories
Description
Description
| USE | |
| Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premisesAir purification with optional F8 filter PM2.5 99 % | Protection from outdoor noiseReducing heat losses caused by ventilation due to heat recoveryHumidity balance and regulated air exchange create individually controlled microclimate |
| DESIGN | |
 |
|
| UNIT OPERATING LOGIC IN WINTER PERIOD | |
 |
|
| Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode. | Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode. |
| CONTROL | |
| Control of the unit operation mode is performed by means of sensor control panel located on the unit casing or a remote controller. | |
 |
 |
| Low voltage (12V) power supply between control panel and VENTO Eco2 units. |
|
| MOUNTING | |
| The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.VENTO Eco2 A50 allows arranging the most efficient balanced ventilation. Two units, connected to a common control panel, operate in reverse phases. One unit ensures supply of fresh air to the room and the other unit provides air extract from the premise. In regeneration mode units change direction of air flow to opposite one every 70 seconds. | One unit is able to ventilate a room up to 25 m2. For bigger rooms two or more units must be installed. |
 |
|
Characteristics
Characteristics
| Parameter | VENTO Eco2 A50 S1 Pro (1 speed) | VENTO Eco2 A50 S1 Pro (2 speed) | VENTO Eco2 A50 S1 Pro (3 speed) | Measurement unit |
|---|---|---|---|---|
| Frequency | 50/60 | 50/60 | 50/60 | Hz |
| Voltage | 100-230 | 100-230 | 100-230 | V |
| Power | 2.07 | 4.15 | 10.10 | W |
| Current | 0.030 | 0.049 | 0.098 | A |
| RPM | 1030 | 1760 | 2690 | min-1 |
| Air flow in ventilation mode | 15 | 30 | 50 | m³/h |
| Air flow in ventilation mode | 4 | 8 | 14 | l/s |
| Air flow in heat recovery mode | 15 | 30 | 50 | m³/h |
| Sound pressure level at 1 m | 22 | 29 | 32 | dBА |
| Air flow in heat recovery mode | 4 | 8 | 14 | l/s |
| Sound pressure level at 3 m | 13 | 20 | 23 | dBА |
| Transported air temperature | -20…+50 | -20…+50 | -20…+50 | °С |
| Filter | G3 (F8 PM2.5 > 99 %) | G3 (F8 PM2.5 > 99 %) | G3 (F8 PM2.5 > 99 %) | - |
| Ingress protection rating | IP24 | IP24 | IP24 | - |
| Remote control panel | Sensor | Sensor | Sensor | - |
| Functions | Filter replacement indication, Timer | Filter replacement indication, Timer | Filter replacement indication, Timer | - |
| Air duct | 160 | 160 | 160 | - |
| Regeneration efficiency in accordance with DIBt LÜ-A 20 | ≤ 92 | ≤ 92 | ≤ 92 | % |
| Outdoor sound pressure attenuation in accordance with DIN EN 20140 | 41 | 41 | 41 | dBА |
| SEC class | A | A | A | - |
| Mounting | wall mounting | wall mounting | wall mounting | - |
Documents archieve
Documents archieve
Select a document type
DIMENSIONS
DIMENSIONS
Accessories
Accessories
| NAME | DESCRIPTION |
| Completion Kit Vento Eco A50 | Cartridge with heat regenerator, fan and G3 filters. Square and round indoor grille with manually actuated shutters |
| SE Vento Eco A50 Pro | Sensor control panel (white) |
| SE VENTO Eco A50 Pro black | Sensor control panel (black) |
| R 160-500 | 500 mm air duct and plastic foam plug |
| R 160-700 | 700 mm air duct and plastic foam plug |
| AH chrome 160 | Outer hood made of brushed stainless steel |
| AH-S chrome 160 | Outer hood for thin wall made of brushed stainless steel |
| Decor 150Fs An white | Outer grille |
| KIT BlauPlast white 160 | Kit for angular mounting with white outer grille |
| KIT BlauPlast chrome 160 | Kit for angular mounting with stainless stees outer grille |
| FP Ventо Eco A50 G3 | G3 filters (2 pcs.) |
| FP Vento Eco A50 F8 | G2 + F8 filters (1 pc.). Filtration rate PM2.5 99 %. Combination of G2 + F8 filters reduces air flow down to 40 m3/h |
| L Vento Eco A50 | Fan |
| PP 160 | Plastic outer grille with pipe for mounting from indoor |
