Blauberg Vento Expert A30 S10 W V.2

Print version

Single-room heat recovery unit with Wi-Fi control. Air flow up to 30 m³/h. Heat recovery efficiency up to 81 %.

EAN4058448044342

Add to project

To comparison

Description
Characteristics
Downloads
Dimensions
Designation key
Technical data
Accessories

Description

FEATURES

Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate.Wi-Fi communication between several single room ventilation units for coordinated operation.Controlled by Android or iOS smartphone or tablet.

DESIGN

One of the best regeneration efficiency on the market due to innovative hexagonal structure of the heat exchanger cells

Built-in Wi-Fi for wireless communication between units and Android or iOS device control

HEAT AND HUMIDITY REGENERATION

UNIT OPERATING LOGIC IN WINTER PERIOD

Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode.

Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode.

CONTROL

Control of the unit operation mode is performed by means of smartphone or tablet. Wi-Fi communication between several units for coordinated operation is available.

Blauberg Vento V.2 app for Android or iOS devices is available at Google Play and App Store.

MOUNTING

The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.The best ventilation solution is pairwise installation of reverse phase synchronized units. Some units ensure supply of fresh air to the room and the other units extract air from the premise. This way the most efficient balanced ventilation is arranged.

In case of brand new construction, units are mounted in two stages:

Pre-installation of an air duct and an outer ventilation hood at the stage of indoor finishing and outer decorative wall finishing.
Completion of the installation before commissioning of a house. It includes installation of the indoor unit with controller and air damper, the cartridge, the regenerator, the fan and the filters.

Characteristics

Parameter	Vento Expert A30 S10 W V.2 (1 speed)	Vento Expert A30 S10 W V.2 (2 speed)	Vento Expert A30 S10 W V.2 (3 speed)	Measurement unit
Voltage	100-240	100-240	100-240	V
Frequency	50/60	50/60	50/60	Hz
Current	0.027	0.037	0.051	A
Power	1.80	3	4.40	W
RPM	1600	2200	2500	min^-1
Maximum air flow	3	6	8	l/s
Maximum air flow	10	20	30	m³/h
Sound pressure level at a distance of 1 m	30	37	40	dBА
Air flow in heat recovery mode	5	10	15	m³/h
Sound pressure level at 3 m	21	28	31	dBА
Air flow in heat recovery mode	1	3	4	l/s
SFP	1.30	1.08	1.06	W/l/s
Filter	G3	G3	G3	-
Transported air temperature	-15…+40	-15…+40	-15…+40	°С
Ingress protection rating	IP24	IP24	IP24	-
EC motor	yes	yes	yes	-
Remote control panel	Sensor Wi-Fi	Sensor Wi-Fi	Sensor Wi-Fi	-
Functions	Wi-Fi, Filter replacement indication, Timer, Weekly schedule, Humidity sensor	Wi-Fi, Filter replacement indication, Timer, Weekly schedule, Humidity sensor	Wi-Fi, Filter replacement indication, Timer, Weekly schedule, Humidity sensor	-
Air duct	100	100	100	-
Outdoor sound pressure attenuation in accordance with DIN EN 20140	42	42	42	dBА
Mounting	wall mounting	wall mounting	wall mounting	-
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D1	D1	D1	-

Documents archieve

Dimensions

Designation key

Model	Air duct		Nominal air flow [m³/h]	Ventilation hood type	Control
Vento Expert	A: round air duct	-	30	S10: white plastic hood AH-10 white 100	W V.2: Control and setup of the unit with the Wi-Fi mobile application

Technical data

Parameters	Vento Expert A30 S10 W V.2
Speed	1	2	3
Voltage [V/50 (60) Hz]	100-240
Power [W]	1.80	3.00	4.40
Current [A]	0.027	0.037	0.051
RPM [min^⁻1]	1600	2200	2500
Air flow in ventilation mode [m³/h (l/s)]	10 (3)	20 (6)	30 (8)
Air flow in heat recovery mode [m³/h (l/s)]	5 (1)	10 (3)	15 (4)
SFP [W/l/s]	1.30	1.08	1.06
Filter	G3
Transported air temperature [°C]	-15…+40
Sound pressure level at 1 m [dBA]	30	37	40
Sound pressure level at 3 m [dBA]	21	28	31
Outdoor sound pressure attenuation [dBA] in accordance with DIN EN 20140	42
Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8	D1
Heat recovery efficiency in accordance with DIBt LÜ-A 20 [%]	≤ 81
Ingress protection rating	IP24

Accessories

Name		Description
Pre-installation Kit Vento Expert A30 S10		Pre-installation kit for mounting into a wall with standard thickness. Includes: • Air duct • AH-10 white 100 outer ventilation hood • Plastic foam plug • Plastic foam wedges
Completion Kit Vento Expert A30 W V.2		Final mounting kit. Includes: • Cartridge with a heat regenerator, a fan and G3 filters • Indoor unit with a controller and air damper
FP3 Ventо G3		G3 filters (2 pcs.)
AH-10 chrome 100		Plastic outer ventilation hood with a plate with brushed stainless steel effect finish
*AH-10 colour* 100**		Plastic outer ventilation hood. Available in colours:
KIT BlauPlast chrome 100		Kit for angular mounting with stainless steel outer grille (for walls with standard thickness)
KIT BlauPlast white 100		Kit for angular mounting with white color grille (for walls with standard thickness)
BlauPlast RTR 100/0.35-0.5		Telescopic air duct with the diameter of 100 mm and adjustable length from 350 to 500 mm
BlauPlast RTR 100/0.5-1		Telescopic air duct with the diameter of 100 mm and adjustable length from 500 to 1000 mm
SE Vento Expert W		Sensor control panel
CD-1		CO₂ sensor with LED CO₂ indication and a sensor button for operation mode selection
CD-2		CO₂ sensor
S Ventо Expert A50		Cardboard template for indoor installation of the unit