Domestic fans
Industrial fans
Single-room air handling units with heat recovery
Air handling units 
Smoke extraction and ventilation
Ventilation accessories
Ventilation ducts and fittings
Air distribution
Measurement and control technology
Ventilation sets and ventsBlauberg VENTO V50-1 Pro
Heat recovery single-room units. Maximum air capacity up to 53 m³/h.
EAN4058448023156 - Description
- Characteristics
- Downloads
- DIMENSIONS
- Accessories
Description
Description
| USE | |
| Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Heat recovery minimises ventilation heat losses. | Humidity balance and controllable air exchange create individually set microclimate.mises ventilation heat losses. Coordinated network based on several integrated single-room ventilation units with central control. |
| DESIGN | |
 |
|
| HEAT AND MOISTURE REGENERATION | |
| High-tech ceramic energy accumulator with heat recovery up to 90 %. | Due to its cellular structure it has a larger contact area surface and high efficiency. The energy accumulator is featured with excellent heatconducting properties and thermal energy storage capacity. |
| Unit operating logic in winter period | |
 |
|
| Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers a part of the accumulated heat and moisture to it. As the ceramic regenerator gets warmed up, the unit switches to the supply mode. | Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit is switched to the extract air mode. |
| CONTROL | |
The integrated automation system enables operation of the unit at the first low speed or the second high speed:
|
 |
To arrange a central controlled ventilation system based on 4 units connect three VENTO V50-1 / V50-1 S units to one VENTO V50-1 Pro / VENTO V50-1 S Pro unit with SEA-T12 control and power unit. No extra accessories are required. To arrange a central controlled ventilation system based on more than 4 units connect a required number of the units, one SEA three-position switch and several 12 W AT-12 transformers or 40 W AT-40 transformers, depending on the total unit power consumption to one VENTO V50-1 / VENTO V50-1 S unit. |
|
| MOUNTING | |
| The unit is designed for external through-the-wall installation inside a prepared square hole in the outer wall of the building.The best ventilation solution is pairwise installation of reverse phase connected units. Some units supply fresh air to the room and the other units extract stale air from the room. This allows to arrange the most efficient balanced ventilation. | In case of brand new construction the units are mounted in two stages:
|
 |
|
Characteristics
Characteristics
| Parameter | VENTO V50-1 Pro (1 speed) | VENTO V50-1 Pro (2 speed) | Measurement unit |
|---|---|---|---|
| Voltage | 220-240 | 220-240 | V |
| Frequency | 50 | 50 | Hz |
| Voltage | 220-240 | 220-240 | V |
| Power | 3.68 | 4.83 | W |
| Current | 0.021 | 0.026 | A |
| RPM | 599 | 1155 | min-1 |
| Maximum air flow | 26 | 53 | m³/h |
| Sound pressure level at 1 m | 24 | 34 | dBА |
| Sound pressure level at 3 m | 14 | 24 | dBА |
| Outdoor sound pressure attenuation | 19 | 19 | dBА |
| Regeneration efficiency | ≤ 90 | ≤ 90 | % |
| Ingress protection rating | IP24 | IP24 | - |
| Remote control panel | Mechanical | Mechanical | - |
| Air duct | 164x164 | 164x164 | - |
| SEC class | A | A | - |
| Mounting | wall mounting | wall mounting | - |
Documents archieve
Documents archieve
Select a document type
DIMENSIONS
DIMENSIONS
Accessories
Accessories
| ACCESSORY NAME | DESCRIPTION |
 SEA-T12 (230/12) control and power unit |
SEA-T12 is an external control unit with a 12 W power transformer. It is included into VENTO V50-1 Pro and VENTO V50-1 S Pro units standard delivery set. |
 SEA control unit |
SEA is an external control unit for the unit operation mode control. |
 AT-12 (230/12) power transformer |
AT-12 is a 12 W power transformer for synchronous connection of 4 units. Used jointly with SEA control unit it ensures a central controllable ventilation system. |
 AT-40 (230/12) power transformer |
AT-40 is a 40 W power transformer for synchronous connection of 12 units. Used jointly with SEA control unit it ensures a central controllable ventilation system. |
| Pre-installation kit for mounting into a wall with standard thickness Pre-installation Kit VENTO V50-1 | Used for brand new construction and stepwise mounting of the units during indoor and outer decorative wall finishing.Includes:
|
| Pre-installation kit for mounting into a thin wall Pre-installation Kit VENTO V50-1 S | Includes:
|
| Final mounting kit Completion Kit VENTO V50-1 | Includes:
|
Similar products
