Mode | Voltage | Style | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Form | Length | Material | Device | Current | Power | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Heat exchanger type | Heat exchanger material | Insulation class | Fan current | Transported air temperature | Connected air duct diameter | Air flow in ventilation mode | Air flow in heat recovery mode | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Sectional size | Insulation | Heat recovery efficiency | Sound pressure level at a distance of 1 m | Operating temperature range | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air speed | Maximum operating pressure | Air flow in ventilation mode | Air flow in heat recovery mode | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Electric heater current | Maximum heat medium temperature | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | * | Motor max. power | ** | Perm. amb. temp. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ALBE-45 | 220-240 | - | ceiling mounting, wall mounting | axial | - | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | - | - | 3850 | - | 50 | 1360 | - | - | Supply | - | 255 | - | - | IP44 | - | 58 | - | - | F | 1.12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1070 | - | 50 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | +100 | - | - | - | - | - | - | - |
Box-F 80x50 4D | 400 | - | Inline | centrifugal | - | for rectangular air ducts | 800 | 500 | galvanized steel | no | no | no | - | - | - | - | - | 9.35 | - | 8120 | - | 50 | 1140 | - | - | Exhaust, Supply | - | 5850 | -25...+40 | - | IPX4 | 3 | 67 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2256 | - | 74.0 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC DBE 300 S21 | 230 | - | ceiling mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | - | - | - | - | - | 300 | - | 50/60 | 2150 | - | - | Supply and exhaust | 79 | - | - | A | - | 1 | 23 | counter-flow | polystyrene | - | - | -25...+40 | 200 | - | - | - | - | - | 25 mm, cellular synthetic rubber | 76...88* | 33 | - | - | 125 | - | 83 | - | - | - | - | G4 | G4, F8 (option F8 C + H11) | - | - | - | - | - | - | - | 1.3 | - | - | 7.3 | - | 1050 | - | - | - | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | - |
KOMFORT Roto EC LW 1200-2 S18 | 230 | - | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | - | - | - | - | 1200 | - | 50/60 | 1930 | - | - | - | - | - | - | - | - | 1 | 60 | rotary | aluminum | - | - | - | 315 | - | - | -25...+40 | - | - | 20 mm mineral wool | 73–95 | - | - | - | - | - | 333 | - | 165 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | 570 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 208 | - | - |
Tubo-M 150 [50 Hz] | 220-240 | - | Inline | axial | 150 | for round air ducts | - | - | polymer-coated steel | - | no | no | - | - | - | - | - | 0.26 | - | 200 | - | 50 | 1300 | - | - | Supply and exhaust | 2.08 | 36 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 56 | - | - | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tubo-M 150 [60 Hz] | 220-240 | - | Inline | axial | 150 | for round air ducts | - | - | polymer-coated steel | - | no | no | - | - | - | - | - | 0.26 | - | 205 | - | 60 | 1590 | - | - | Supply and exhaust | 2.08 | 26 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 57 | - | - | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Bravo 150 | 220-240 | White | ceiling mounting, wall mounting | axial | 150 | - | - | - | - | - | - | - | - | - | - | - | - | 0.13 | 24 | 305 | 39* | 50 | 2400 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 85 | 0.28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Box-FI 80x50 4D | 400 | - | Inline | centrifugal | - | for rectangular air ducts | 800 | 500 | galvanized steel | no | no | yes | - | - | - | - | - | 9.35 | - | 8120 | - | 50 | 1140 | - | - | Exhaust, Supply | - | 5850 | - | - | IPX4 | 3 | 61 | - | - | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | 2256 | - | 120 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauPlast UBS 125/204x60 | - | - | - | - | 125 | for rectangular air ducts, for round air ducts | - | - | - | - | - | - | - | - | 140 | plastic | connector | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60х204 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 355 4Е (50 Hz) | 230 | - | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 0.96 | - | 2480 | - | 50 | 1420 | - | - | Exhaust | 28.3 | 219 | -25…+50 | - | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 689 | - | - | 2018 | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 355 4Е (60 Hz) | 230 | - | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 1.33 | - | 2976 | - | 60 | 1580 | - | - | Exhaust | 28.3 | 304 | -25…+50 | - | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 827 | - | - | – | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 315 max | 230 | - | Inline | centrifugal | 315 | for round air ducts | - | - | plastic | no | no | no | - | - | - | - | - | 1.36 | - | 1700 | - | 50 | - | - | - | Exhaust, Supply | - | 310 | -25...+45 | - | IPX4 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 472 | - | 4.85 | 2018 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC S2E 200 S21 | 230 | - | - | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | - | - | - | - | - | 270 | - | 50/60 | 1800 | - | - | - | - | - | - | A | - | 1 | 28 | rotary | aluminum | - | - | - | 125 | - | - | -25…+40 | - | - | 20 mm mineral wool | 75–92 | - | - | - | - | 700 | 75 | - | 48 | 2016, 2018 | - | G4 | G4, F7 | - | - | - | - | - | 118 | 818 | 1.0 | 4.0 | - | - | - | - | - | - | - | - | 3.0 | - | - | - | - | - | - | - | - |
S-Vent 240х114-3.0-2D | 400 | - | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 6.1 | - | - | - | 50 | 2870 | - | 4350 | Exhaust, Supply | 31.4 | 3000 | 60 | - | IP54 | - | 78 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 70x40-1 | 230 | - | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | - | - | - | - | - | 5710 | - | 50/60 | 1400 | - | - | Exhaust, Supply | 42.2 | 795 | - | – | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | - | 1586 | - | - | 2018 | - | - | - | - | - | - | - | IP54 | - | - | - | - | - | - | 3.48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFP 700 | 200-240 | - | ceiling mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | - | - | - | - | 700 | - | 50/60 | 4120 | - | - | Supply and exhaust | - | 2x169 | - | - | IP34 | 1 | 33 | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | - | 85 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | - | - | - | - | IP54 | - | - | - | 1.75 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
KOMFORT EC LB 400-E S21 | 230 | - | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | - | - | - | - | - | 540 | - | 50/60 | 2600 | - | - | - | - | - | - | A | - | 1 | 27 | counter-flow | enthalpy | - | - | - | 200 | - | - | -25…+40 | - | - | 40 mm mineral wool | 78–89 | - | - | - | - | - | 150 | - | 74.8 | - | - | G4 | G4, F7 | - | - | - | - | - | 289 | - | 2.1 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-ZS 315 4E max | 230 | - | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | - | - | - | - | 4.18 | - | - | - | 50 | 1430 | - | 3520 | Exhaust, Supply | 38.0 | 931 | -20…+50 | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Sileo V2 125 min | - | White | ceiling mounting, wall mounting | axial | 125 | - | - | - | - | - | - | - | - | - | - | - | - | 0.065 | 9.5 | 145 | 28* | 50 | 1800 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 40 | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Sileo V2 125 max | - | White | ceiling mounting, wall mounting | axial | 125 | - | - | - | - | - | - | - | - | - | - | - | - | 0.09 | 13.5 | 170 | 32* | 50 | 2250 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 47 | 0.29 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Vento Ergo A85-1 S10 Pro1 (1 speed) |
- | - | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | - | 0.034 | - | 36 | - | 50/60 | 1000 | I | - | - | - | 4.74 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | 18 | -20...+40 | 40 | - | - | - | - | - | 100-230 | - | - | 10 | 0.95 | - | - | - | - | - | - | - | - | 5 | - | - | - | - | - | - | - | - | - | 29 | 19 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
Vento Ergo A85-1 S10 Pro1 (2 speed) |
- | - | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | - | 0.050 | - | 59 | - | 50/60 | 1500 | II | - | - | - | 6.56 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | 30 | -20...+40 | 40 | - | - | - | - | - | 100-230 | - | - | 16 | 0.80 | - | - | - | - | - | - | - | - | 8 | - | - | - | - | - | - | - | - | - | 35 | 25 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
Vento Ergo A85-1 S10 Pro1 (3 speed) |
- | - | - | - | - | 150 | - | - | - | - | - | - | - | - | - | - | - | 0.071 | - | 85 | - | 50/60 | 2045 | III | - | - | - | 9.65 | - | - | IP24 | 1 | - | - | - | - | - | - | - | - | 43 | -20...+40 | 40 | - | - | - | - | - | 100-230 | - | - | 24 | 0.82 | - | - | - | - | - | - | - | - | 12 | - | - | - | - | - | - | - | - | - | 44 | 34 | G3 (Option: F8 PM2,5 > 99 %*) | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
BlauPlast FK 110×55/1.0 | - | - | - | - | - | - | - | - | - | - | - | - | - | rectangular | 1000 | PVC (plastic) | air duct | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 55х110 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 400 4D 50 Hz |
400 | - | wall mounting | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | - | - | 3740 | - | 50 | 1380 | - | - | Exhaust, Supply | - | 180 | - | - | IPX4 | 3 | 54 | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | - | 1039 | - | 8.5 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QR 400 4D 60 Hz |
400 | - | wall mounting | axial | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | - | - | 3870 | - | 60 | 1625 | - | - | Exhaust, Supply | - | 195 | - | - | IPX4 | 3 | 54 | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | - | 1075 | - | 8.5 | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | 0.55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Jet Hi-tech 100 | 220-240 | - | ceiling mounting, wall mounting | axial | 100 | - | - | - | - | - | - | - | - | - | - | - | - | 0.085 | 14 | 95 | 34* | 50 | 2300 | - | - | Exhaust | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 26 | 0.53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Vento Expert A50-1 Pro V.3(I speed) | 100-240 | - | - | - | - | 160 | - | - | - | yes | - | - | - | - | - | - | - | 0.035 | 5 | - | - | 50/60 | 800 | I | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | - | - | 15 | 8 | -20...+40 | 41/47** | - | - | - | - | - | - | - | - | - | 2.4 | - | - | - | - | - | - | - | 4 | 2 | - | - | - | - | - | - | - | - | - | 13 | 4 | G3 (Option: G4; F7 PM2.5 > 70 %*) | up to 95 | - | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | Maximum air flow 40 m³/h | - | with open and closed front panel | - |
Vento Expert A50-1 Pro V.3(II speed) | 100-240 | - | - | - | - | 160 | - | - | - | yes | - | - | - | - | - | - | - | 0.040 | 6 | - | - | 50/60 | 1300 | II | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | - | - | 35 | 18 | -20...+40 | 41/47** | - | - | - | - | - | - | - | - | - | 1.23 | - | - | - | - | - | - | - | 10 | 5 | - | - | - | - | - | - | - | - | - | 25 | 16 | G3 (Option: G4; F7 PM2.5 > 70 %*) | up to 95 | - | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | Maximum air flow 40 m³/h | - | with open and closed front panel | - |
Vento Expert A50-1 Pro V.3(III speed) | 100-240 | - | - | - | - | 160 | - | - | - | yes | - | - | - | - | - | - | - | 0.059 | 8.5 | - | - | 50/60 | 1900 | III | - | - | - | - | - | - | IP24 | - | - | - | - | - | - | - | - | 50 | 25 | -20...+40 | 41/47** | - | - | - | - | - | - | - | - | - | 1.22 | - | - | - | - | - | - | - | 14 | 7 | - | - | - | - | - | - | - | - | - | 37 | 28 | G3 (Option: G4; F7 PM2.5 > 70 %*) | up to 95 | - | - | - | Filter replacement indication, Timer, Humidity sensor, External sensor connection | D1 | Maximum air flow 40 m³/h | - | with open and closed front panel | - |
BlauFlex Iso N 102/7.6 | - | - | - | - | 102 | for round air ducts | - | - | - | - | - | - | - | round | 7600 | - | air duct | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25 mm mineral wool | - | - | -30...+120 | - | - | - | - | - | - | - | - | - | - | 30 | 3000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-A 250 2Е (60 Hz) | 230 | - | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 0.42 | - | 1150 | - | 60 | 2990 | - | - | Exhaust | 7.0 | 91 | -30…+50 | - | IP24 | 1 | 61 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 319 | - | - | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-A 250 2Е (50 Hz) | 230 | - | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | - | - | - | 0.4 | - | 1050 | - | 50 | 2400 | - | - | Exhaust | 7.0 | 80 | -30…+60 | - | IP24 | 1 | 60 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 292 | - | - | - | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x2 V3(1 speed) | 230 | - | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | 0.32 | - | - | - | 50 | 1400 | - | 88 | Exhaust, Supply | 3.1 | 20 | 50 | C | IPX4 | - | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x2 V3(2 speed) | 230 | - | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | 0.34 | - | - | - | 50 | 1800 | - | 130 | Exhaust, Supply | 3.1 | 26 | 50 | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 80/80x2 V3(3 speed) | 230 | - | Inline | centrifugal | 80 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | - | - | 0.4 | - | - | - | 50 | 2600 | - | 162 | Exhaust, Supply | 3.1 | 45 | 50 | C | IPX4 | - | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |