Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Electric heater current | Current | Connected air duct diameter | Transported air temperature | Insulation | Heat recovery efficiency | Total unit power | Voltage | Reheater power consumption | Insulation thikness | Maximum air flow | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit current without electric heater | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Electric heater current | Remote control panel | Functions | Cable cross section | * | Motor max. power | ** |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tower-H EC 355 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 9.36 | 3830 | - | 50/60 | 1550 | - | - | - | Exhaust | - | 669 | -25...+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1064 | 27 | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 315 | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 1.15 | 1370 | - | 50/60 | 2900 | - | - | - | Exhaust, Supply | - | 164 | -25...+60 | – | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 381 | 7.30 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo 35/60 (1 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.12 | 35 | 27* | 50 | - | I | - | - | Exhaust | - | 15 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 10 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - |
Valeo 35/60 (2 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.14 | 63 | 36* | 50 | - | II | - | - | Exhaust | - | 25 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 18 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - |
Box-I EC 50x30-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 4.20 | - | - | 50/60 | 3100 | - | - | 2700 | Exhaust, Supply | 29.0 | 553 | -25...+50 | – | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 750 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LE 1500-9 S18 | 400 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 1500 | - | 50/60 | 2000 | - | - | - | - | - | - | - | - | - | 3 | 62 | - | - | rotary | aluminum | 9000 | - | - | 315 | -25...+40 | 25 mm mineral wool | 72–95 | - | - | - | - | 417 | 175 | 2016, 2018 | - | G4 | G4 | - | - | - | 9750 | 14.1 | - | - | - | - | - | - | - | - | 2 items x 222 | - |
Iso-K 355 4E (50 Hz) | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.11 | - | - | 50 | 1517 | - | - | 3545 | Exhaust | - | 393 | -20…+120 | - | IP54 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 985 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-K 355 4E (60 Hz) | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.34 | - | - | 60 | 1705 | - | - | 3860 | Exhaust | - | 525 | -20…+120 | - | IP54 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 1072 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 3.43 | 3610 | - | 50 | 1480 | - | - | - | - | 24 | 580 | - | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | 1003 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QRA 315 50 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1700 | - | 50 | 1300 | - | - | - | Exhaust, Supply | - | 110 | -30 … +40 | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.24 | - | - | - | - | IP44 | - | - | - | - | 0.75 | - | - | - | - | - | - | - | - | - |
Axis-QRA 315 60 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1650 | - | 60 | 1365 | - | - | - | Exhaust, Supply | - | 104 | -30 … +40 | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.24 | - | - | - | - | IP44 | - | - | - | - | 0.7 | - | - | - | - | - | - | - | - | - |
Centro 125 60 Hz | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | plastic | no | no | no | - | 0.35 | 370 | - | 60 | 2830 | - | - | - | Exhaust, Supply | - | 81 | -25...+50 | – | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 103 | 2.20 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 125 50 Hz | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | plastic | no | no | no | - | 0.34 | 355 | - | 50 | 2800 | - | - | - | Exhaust, Supply | - | 79 | -25...+55 | B | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 99 | 2.20 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x35 4E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 2.37 | 2950 | - | 50 | 1370 | - | - | - | Exhaust, Supply | 56.2 | 470 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | -40…+80 | - | - | - | - | - | - | 820 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x35 4E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 3.15 | 3515 | - | 60 | 1460 | - | - | - | Exhaust, Supply | 56.2 | 700 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | -40…+55 | - | - | - | - | - | - | 976 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Helix 160х90 2E | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | - | no | yes | no | - | 1.48 | - | - | 50 | 2745 | - | - | 730 | Exhaust, Supply | 5.1 | 320 | -25 +45 | C | IPX4 | - | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Δ) 50 Hz |
400 (Δ) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 1.41 | 2970 | - | 50 | 1415 | - | - | - | Exhaust, Supply | 36.38 | 510 | - | - | IPX4 | 3 | 64 | - | - | - | - | - | - | - | - | -40...+60 | - | - | - | - | - | - | 825 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Y) 50 Hz |
400 (Y) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 0.7 | 2660 | - | 50 | 1235 | - | - | - | Exhaust, Supply | 36.38 | 380 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | -40...+80 | - | - | - | - | - | - | 739 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Δ) 60 Hz |
400 (Δ) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 1.44 | 3410 | - | 60 | 1610 | - | - | - | Exhaust, Supply | 36.38 | 750 | - | - | IPX4 | 3 | 53 | - | - | - | - | - | - | - | - | -40...+60 | - | - | - | - | - | - | 947 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Y) 60 Hz |
400 (Y) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 0.93 | 2730 | - | 60 | 1220 | - | - | - | Exhaust, Supply | 36.38 | 515 | - | - | IPX4 | 3 | 50 | - | - | - | - | - | - | - | - | -40...+40 | - | - | - | - | - | - | 758 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT LE 2200-18 | 400 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 2200 | - | 50/60 | 1150 | - | 77 | - | - | - | - | - | NRVU | - | 3 | 65 | - | - | cross-flow | polystyrene | 18000 | 26 | 31.7 | 315 | -25...+40 | 25 mm mineral wool | - | 19300 | - | - | - | 611 | 96 | - | - | G4 | G4 | - | 1300 | 5.7 | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V 710 6D | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | no | yes | yes | - | 3.90 | - | - | 50/60 | 890 | - | - | - | Exhaust, Supply | 136.0 | 2000 | -20 +40 | - | IPX4 | 3 | 59 | 15830 | 14880 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Freshbox 100 Speed I |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 30 | - | 50/60 | 2200 | I | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | 100 | -15...+40 | - | 98 | - | - | - | 10 | 8 | - | - | - | G4 | - | - | 12 | 0.4 | - | - | - | - | 13 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | |
Freshbox 100 Speed II |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 60 | - | 50/60 | 2200 | II | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | 100 | -15...+40 | - | 92 | - | - | - | 10 | 17 | - | - | - | G4 | - | - | 21 | 0.4 | - | - | - | - | 27 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | |
Freshbox 100 Speed III |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 100 | - | 50/60 | 2200 | III | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | polystyrene | - | - | - | 100 | -15...+40 | - | 89 | - | - | - | 10 | 28 | - | - | - | G4 | - | - | 45 | 0.4 | - | - | - | - | 39 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | |
Axis-Q 710 6D | 400 | wall mounting | axial | 710 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 15440 | - | 50 | 830 | - | - | - | Exhaust, Supply | - | 1150 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | 4289 | 33.0 | - | - | - | - | IP54 | - | - | - | - | 2.0 | - | - | - | - | - | - | - | - | - |
Box-FI 60x35 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | yes | - | 3.93 | 5020 | - | 50 | 1300 | - | - | - | Exhaust, Supply | - | 2460 | - | - | IPX4 | 3 | 52 | - | - | - | - | - | - | - | - | -20...+40 | - | - | - | - | - | - | 1395 | 72 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V EC 190 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 0.77 | 670 | - | 50/60 | 3520 | - | - | - | Exhaust | - | 102 | -25...+60 | B | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 186 | 7 | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 200 V2 (1 speed) | 1 ~ 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.45 | - | - | 50 | 770 | - | - | 460 | Exhaust, Supply | 8.8 | 103 | 50 | C | IPX4 | - | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 128 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 200 V2 (2 speed) | 1 ~ 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.63 | - | - | 50 | 1200 | - | - | 752 | Exhaust, Supply | 8.8 | 142 | 50 | C | IPX4 | - | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 209 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC DE 2000-12 R | 400 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 2000 | - | 50/60 | 2920 | - | - | - | - | - | - | - | NRVU | - | 3 | 58 | - | - | cross-flow | aluminum | 12000 | - | - | 315 | -25…+40 | 25 mm mineral wool | 75 | - | - | - | - | 556 | 190 | 2016 | - | G4 | G4 | - | 840 | 5 | 12870 | 22.4 | - | - | - | 17.4 | - | - | - | - | - | - |
KOMFORT EC DE 4000-21 R | 400 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 4000 | - | 50/60 | 2580 | - | - | - | - | - | - | - | NRVU | - | 3 | 59 | - | - | cross-flow | aluminum | 21000 | - | - | 400 | -25…+40 | 25 mm mineral wool | 75 | - | - | - | - | 1111 | 290 | 2016 | - | G4 | G4 | - | 1980 | 3.4 | 23000 | 33.4 | - | - | - | 30.0 | - | - | - | - | - | - |
S-Vent 250х127-5.5-2D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 10.7 | - | - | 50 | 2850 | - | - | 4820 | Exhaust, Supply | 40 | 5500 | 60 | - | IP54 | - | 81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |