Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heat exchanger | Heating | Current | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Transported air temperature | Current | Connected air duct diameter | Air flow in ventilation mode | Connected air duct size | Transported air temperature | Outdoor sound pressure attenuation in accordance with DIN EN 20140 | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Voltage | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Air flow in ventilation mode | Motor IP rating | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Sound pressure level at 1 m in accordance with ISO 3741:2004 | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Filter | Heat recovery efficiency in accordance with DIBt LÜ-A 20 | Air flow in heat recovery mode | Air flow in heat recovery mode | Remote control panel | Functions | Indoor/outdoor airtightness classification of the complete unit in accordance with EN 13141-8 | Classification of air flow sensitivity to pressure difference variations in accordance with EN 13141-8 | * | Motor max. power | ** | *** | Perm. amb. temp. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tower-V 500 4D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.64 | 8435 | 50 | 1460 | - | - | - | Exhaust | 52 | 1527 | -30…+50 | - | IPX4 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2343 | - | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 150 | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 0.38 | - | 50 | 2600 | - | - | 553 | Exhaust, Supply | 6.35 | 85 | -25 +40 | B | IPX4 | - | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO A50-1 S (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
VENTO A50-1 S (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
Box-F 60x35 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | no | - | - | 1.47 | 3310 | 50 | 940 | - | - | - | Exhaust, Supply | - | 743 | -20...+70 | - | IPX4 | 3 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 920 | - | 49.5 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC DW 3800-2 R | 400 | ceiling mounting | - | - | - | - | - | aluzinc | yes | - | - | - | - | - | 3800 | 50/60 | 2580 | - | - | - | - | - | 1990 | - | NRVU | - | 3 | 59 | - | - | cross-flow | aluminum | - | - | - | - | - | - | - | - | 400 | - | - | -25…+40 | - | 2 | 25 mm mineral wool | 75 | - | - | 1056 | - | 295 | 2016 | - | G4 | G4 | - | - | - | - | - | 3.40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 50 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 800 | 50 | 1380 | - | - | - | Exhaust, Supply | - | 50 | - | - | IPX4 | 1 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | 222 | - | 4.0 | - | - | - | - | - | IP24 | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 60 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 865 | 60 | 1730 | - | - | - | Exhaust, Supply | - | 56 | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | 240 | - | 4.0 | - | - | - | - | - | IP24 | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR RV 1500 | 200-240 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | 1500 | 50/60 | 3000 | - | - | - | Supply and exhaust | - | 2x610 | - | - | IP34 | 1 | 37 | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | 307 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | - | IP54 | 5.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
Tower-H 560 6E | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.70 | 9560 | 50 | 930 | - | - | - | Exhaust | 76.4 | 613 | -25…+50 | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2656 | - | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 315 max (50 Hz) | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1.34 | 1920 | 50 | 2720 | - | - | - | Exhaust, Supply | - | 295 | - | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+45 | - | - | - | - | - | - | 533 | - | 8.8 | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M 315 max (60 Hz) | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1.8 | 1980 | 60 | 2780 | - | - | - | Exhaust, Supply | - | 413 | - | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25…+45 | - | - | - | - | - | - | 550 | - | 8.8 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 400х183-2.2-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 5.8 | - | 50 | 940 | - | - | 8100 | Exhaust, Supply | 54.1 | 2200 | 60 | - | IP54 | - | 73 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 60x30-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | - | 2.45 | - | 50/60 | 2000 | - | - | 2545 | Exhaust, Supply | 52.9 | 326 | -25...+50 | – | IPX4 | 1 | 34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 707 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LE 400-2 S18 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | - | 400 | 50/60 | 3100 | - | - | - | - | - | - | - | A | - | 1 | 45 | - | - | rotary | aluminum | 2000 | - | - | - | - | - | - | - | 160 | - | - | -25...+40 | - | - | 20 mm mineral wool | 80–95 | - | - | 111 | - | 112 | 2016, 2018 | - | G4 | G4 | - | - | - | 2290 | 9.9 | - | - | - | - | - | - | - | - | - | - | - | - | 2 items x 100 | - | - | - |
KOMFORT L 350 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | - | 350 | 50/60 | 1150 | - | 78 | - | Supply and exhaust | - | - | - | E | - | 1 | 24-45 | - | - | cross-flow | polystyrene | - | - | - | - | - | - | - | 1.2 | 125 | - | - | -25...+40 | - | - | 25 mm mineral wool | - | 260 | - | 97 | - | 45 | 2016 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V 355 4D | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | no | yes | yes | - | - | 0.52 | - | 50/60 | 1400 | - | - | - | Exhaust, Supply | 25.0 | 230 | -25 +70 | - | IPX4 | 3 | 53 | 2660 | 2380 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX MW 1200-4 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | no | no | yes | - | - | - | 1200 | 50 | 1850 | - | - | - | Supply | - | - | - | - | - | 1 | 38 | - | - | - | - | - | - | - | - | - | - | -25...+40 | 1.8 | - | - | 400х200 | - | - | 4 | 25 mm mineral wool | - | 410 | - | 333 | - | 42.8 | 2016, 2018 | - | - | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 350 4Е 50 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 2500 | 50 | 1380 | - | - | - | Exhaust, Supply | - | 140 | - | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | 695 | - | 7.8 | - | - | - | - | - | IP54 | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 350 4Е 60 Hz |
230 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | - | 2650 | 60 | 1700 | - | - | - | Exhaust, Supply | - | 147 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | 736 | - | 7.8 | - | - | - | - | - | IP54 | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Vento Eco2 A50-4 S11 Pro (1 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | 0.033 | - | 50/60 | 915 | I | - | - | - | - | 2.37 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 15 | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | 0.57 | - | - | - | - | - | 4 | - | - | - | - | - | 21 | 12 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 15 | 4 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
Vento Eco2 A50-4 S11 Pro (2 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | 0.047 | - | 50/60 | 1555 | II | - | - | - | - | 3.80 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | 0.46 | - | - | - | - | - | 8 | - | - | - | - | - | 27 | 18 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 30 | 8 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
Vento Eco2 A50-4 S11 Pro (3 speed) | - | - | - | - | 160 | - | - | - | - | - | - | - | - | 0.080 | - | 50/60 | 2330 | III | - | - | - | - | 7.61 | - | - | IP24 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 50 | - | -20(-30**) … +40 | 41 | - | - | - | - | 100-240 | - | 0.55 | - | - | - | - | - | 14 | - | - | - | - | - | 29 | 20 | G3 (Option: F8 PM2,5 > 99 %*) | up to 92 | 50 | 14 | Sensor | Filter replacement indication, Timer | D1 | S3*** | Maximum air flow 40 m³/h | - | With ZL1 Vento 160/100 cartridge and AH-8 outer hood applied | At III speed | - |
Tower-V 400 4Е | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.00 | 3950 | 50 | 1440 | - | - | - | Exhaust | 33 | 457 | -30…+60 | - | IPX4 | 1 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1097 | - | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-MZ 125 L 50 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 125 | for round air ducts | - | - | galvanized steel | no | no | no | - | - | 0.37 | 230 | 50 | 2605 | - | - | - | Exhaust, Supply | 3.16 | 60 | - | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | 64 | - | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-MZ 125 L 60 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 125 | for round air ducts | - | - | galvanized steel | no | no | no | - | - | 0.37 | 240 | 60 | 2720 | - | - | - | Supply and exhaust | 3.16 | 61 | - | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | 67 | - | - | 2018 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO V50-1 (1 speed) | 220-240 | wall mounting | - | - | 164x164 | - | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 19 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
VENTO V50-1 (2 speed) | 220-240 | wall mounting | - | - | 164x164 | - | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 19 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - | - | - |
Box-F 50x25 6E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | no | - | - | 1.22 | 1460 | 50 | 910 | - | - | - | Exhaust, Supply | - | 244 | -20...+50 | - | IPX4 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 406 | - | 24.0 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC DB 350 S14 | 230 | ceiling mounting, wall mounting | - | - | for round air ducts | - | - | galvanized steel | yes | no | yes | - | - | - | 410 | 50/60 | 3200 | - | 80...91 | - | Supply and exhaust | - | - | - | A | - | 1 | 34 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | 1.3 | 160 | - | - | -25...+40 | - | - | 40 mm mineral wool | - | 170 | - | 114 | - | 70 | 2016, 2018 | - | G4 | F7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tubo-MZ 200 [50 Hz] | 220-240 | Inline | axial | 200 | for round air ducts | - | - | galvanized steel | - | no | no | - | - | 0.28 | 405 | 50 | 1300 | - | - | - | Supply and exhaust | 2.54 | 43 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 113 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tubo-MZ 200 [60 Hz] | 220-240 | Inline | axial | 200 | for round air ducts | - | - | galvanized steel | - | no | no | - | - | 0.21 | 470 | 60 | 1615 | - | - | - | Supply and exhaust | 2.54 | 33 | -30 … +40 | – | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 131 | - | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR RH 5000 | 380-480 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | - | 5000 | 50/60 | 1350 | - | - | - | Supply and exhaust | - | 2x1410 | - | - | IP34 | 3 | 32 | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | 559 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | - | IP54 | 3.95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
Tower-H 500 4D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | - | 2.64 | 8435 | 50 | 1460 | - | - | - | Exhaust | 46.6 | 1527 | -30…+50 | - | IPX4 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2343 | - | - | 2018 | - | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |