Blauberg Box-F 90x50 8D

Print version

Centrifugal fan for rectangular ducts. Maximum air flow up to 7175 m³/h.

EAN4058448063312

Add to project

To comparison

Description
Characteristics
Capacity diagram
Downloads
Designation key
Dimensions
Additional characteristics
Accessories

Description

USE	MOTOR
Supply and extract ventilation systems installed in various premises. Compatible with 400x200 up to 1000x500 mm rectangular air ducts.	Four-, six- or eight-pole asynchronous motor with external rotor and centrifugal impeller with forward curved blades. Due to its impeller design the fan has excellent air dynamic charakteristics (high performance and pressure drop). Single-phase (E) or three-phase (D) motor modifications. Equipped with ball bearings for longer service life. Dynamically balanced impeller. Overheating protection by built-in thermal switches with leaded outside terminals for connection to external protecting controls. The thermal switch terminal leads are designed for connection to respective circuit ot the overload relay or respective terminals of the autotransformer or thyristor speed controller.
DESIGN
Atmospheric resistant galvanized steel casing and impeller. The fan is rated for continuous operation. Fitted with standard 20 mm connecting flanges for connection to rectangular air ducts. Access cover on the casing for inspection and maintenance operations. The fans with standard size from 40x20 up to 60x35 are equipped with a terminal block integrated into the casing with leaded outside sealed electrical lead-in for connection to power mains. The fans with standard size from 70x40 up to 100x50 are equipped with an external terminal block for connection to power mains.
	MOUNTING
	The fan is designed for mounting inside rectangular air ducts and can be installed in any position. The fan flanges are connected to the air ducts through the bolts inserted into the flange holes. Mounting to a round air duct on exhaust flange through a round pipe reducer. Available upon order. If flexible vibration-absorbing connectors are used to connect the fan to the air ducts provide their fixation to mounting structures with supports or brackets. While mounting provide enough space for accessing the cover for service operations.
SPEED CONTROL
Smooth speed control with an external thyristor controller or step speed control with an external auto transformer (both available upon separate order).

Characteristics

Parameter	Box-F 90x50 8D	Measurement unit
Voltage	400	V
Phase	3	˜
Frequency	50	Hz
Power	2000	W
Current	4.1	A
RPM	680	min^-1
Maximum air flow	1993	l/s
Maximum air flow	7175	m³/h
Sound pressure level at 3 m	59	dBА
Max. operating temperature	-20...+40	°С
Motor IP rating	IP44	-
Ingress protection rating	IPX4	-
EC motor	no	-
Weight	90.0	kg
Width	900	mm
Height	500	mm
Casing material	galvanized steel	-
Outdoor mounting	no	-
Sound-insulated casing	no	-
Air duct	for rectangular air ducts	-
Design	centrifugal	-
Type	Exhaust, Supply	-
Mounting	Inline	-

Capacity diagram

Selection method:
Air capacity:
Pressure:

Operating point

Air capacity: --
Pressure: ---

Documents archieve

Designation key

Series	Flange size (width x height) [cm]	Motor Number of poles	Phase
Box-F	40x20; 50x25; 50x30; 60x30; 60x35; 70x40; 80x50; 90x50; 100x50	4; 6; 8	E: single-phase D: three-phase

Dimensions

Model	Overall dimensions [mm]
Model	B	B1	B2	H	H1	H2	H3	L
Box-F 90х50 8D	900	920	940	500	520	540	580	954

Additional characteristics

Sound power level, A-weighted	Octave frequency bands [Hz]
Sound power level, A-weighted	Total	63	125	250	500	1000	2000	4000	8000	LpA, 3 m	LpA, 1 m
L_wA to inlet [dBA]	87	77	79	75	81	82	79	75	70	67	77
L_wA to outlet [dBA]	93	73	75	81	91	85	84	83	73	73	83
L_wA to environment [dBA]	79	62	66	77	72	69	68	64	56	59	69

Accessories

Silencer	Filter boxes	Electric heater	Water heater	Air dampers		Flexible antivibration connector

SD	KFBK / KFBT	EKH	WKH	SL	VG	EVA