Single-room heat recovery unit BLAUBERG VENTO Eco A50 S Pro

Description

USE
Arrangement of efficient energy-saving supply and exhaust single-room ventilation in flats, houses, cottages, social and commercial premises.Air purification with optional F8 filter PM2.5 99 %.	Protection from outdoor noise.Reducing heat losses caused by ventilation due to heat recovery.Humidity balance and regulated air exchange create individually controlled microclimate.
DESIGN

UNIT OPERATING LOGIC IN WINTER PERIOD

Warm stale air is extracted from the premise, flows through the ceramic regenerator and transfers its heat energy and moisture to it.As the ceramic regenerator gets warmed up, the unit switches to the supply mode.	Clean cold intake air flows through the regenerator and absorbs accumulated heat and humidity.When the ceramic regenerator is cooled down, the unit switches to the extract air mode.
CONTROL
Control of the unit operation mode is performed by means of the sensor control panel.

One control panel with sensor buttons can control up to two units.	Low voltage (12V) power supply between control panel and VENTO Eco units.
MOUNTING
The unit is designed for through-the-wall installation inside a prepared hole in an outer wall of the building.	One unit can ventilate a room up to 25 m². For bigger rooms two or more units must be installed.

Characteristics

Parameter	VENTO Eco A50 S Pro (1 speed)	VENTO Eco A50 S Pro (2 speed)	VENTO Eco A50 S Pro (3 speed)	Measurement unit
Frequency	50/60	50/60	50/60	Hz
Voltage	100-230	100-230	100-230	V
Power	0.89	2.32	5.39	W
Current	0.018	0.032	0.060	A
RPM	1030	1760	2690	min^-1
Air flow in ventilation mode	15	30	50	m³/h
Air flow in ventilation mode	4	8	14	l/s
Air flow in heat recovery mode	8	15	25	m³/h
Sound pressure level at 1 m	22	29	32	dBА
Air flow in heat recovery mode	2	4	7	l/s
Sound pressure level at 3 m	13	20	23	dBА
Transported air temperature	-20…+50	-20…+50	-20…+50	°С
Filter	G3 (F8 PM2.5 > 99 %)	G3 (F8 PM2.5 > 99 %)	G3 (F8 PM2.5 > 99 %)	-
Ingress protection rating	IP24	IP24	IP24	-
Remote control panel	Sensor	Sensor	Sensor	-
Functions	Filter replacement indication, Timer	Filter replacement indication, Timer	Filter replacement indication, Timer	-
Air duct	160	160	160	-
Regeneration efficiency in accordance with DIBt LÜ-A 20	≤ 92	≤ 92	≤ 92	%
Outdoor sound pressure attenuation in accordance with DIN EN 20140	41	41	41	dBА
SEC class	A	A	A	-
Mounting	wall mounting	wall mounting	wall mounting	-

Documents archieve

Dimensions

Accessories

NAME	DESCRIPTION
Completion Kit Vento Eco A50	Cartridge with heat regenerator, fan and G3 filters. Square and round indoor grille with manually actuated shutters
SE Vento Eco A50 Pro	Sensor control panel (white)
SE VENTO Eco A50 Pro black	Sensor control panel (black)
R 160-500	500 mm air duct and plastic foam plug
R 160-700	700 mm air duct and plastic foam plug
AH chrome 160	Outer hood made of brushed stainless steel
AH-S chrome 160	Outer hood for thin wall made of brushed stainless steel
Decor 150Fs An white	Outer grille
KIT BlauPlast white 160	Kit for angular mounting with white outer grille
KIT BlauPlast chrome 160	Kit for angular mounting with stainless stees outer grille
FP Ventо Eco A50 G3	G3 filters (2 pcs.)
FP Vento Eco A50 F8	Filtration rate PM2.5 99 %. Combination of G2 + F8 filters reduces air flow down to 410 m³/h
L Vento Eco A50	Fan
PP 160	Plastic outer grille with pipe for mounting from indoor

Blauberg VENTO Eco A50 S Pro