Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Maximum air flow | Sound pressure level | Frequency | RPM | Speed | Extract / supply filter | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Cable cross section | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Number of electrical heating elements | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Filter | Transported air temperature | Humidity recovery efficiency | Insulation | Heat recovery efficiency | Total unit power | Voltage | Reheater power consumption | Insulation thikness | Maximum air flow | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Sound pressure level at 3 m in accordance with ISO 3741:2004 | Electric heater current | Remote control panel | Functions | Cable cross section | * | Motor max. power | ** | Perm. amb. temp. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Tower-V EC 355 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 9.36 | 3830 | - | 50/60 | 1550 | - | - | - | - | Exhaust | - | 669 | -25...+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1064 | 23 | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x6 V3(1 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.32 | - | - | 50 | 1400 | - | - | - | 97 | Exhaust, Supply | 3.5 | 20 | 50 | C | IPX4 | - | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 27 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x6 V3(2 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.34 | - | - | 50 | 1800 | - | - | - | 138 | Exhaust, Supply | 3.5 | 26 | 50 | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 100/100x6 V3(3 speed) | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.4 | - | - | 50 | 2600 | - | - | - | 176 | Exhaust, Supply | 3.5 | 45 | 50 | C | IPX4 | - | 44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra D 105 (1 speed) |
230 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | 0.18 | 57 | - | 50 | 1300 | - | G4 | - | - | - | - | 30 | - | D | - | 1 | 24 | - | - | cross-flow | - | enthalpy | - | - | - | - | - | - | - | - | - | - | 125 | - | -25...+40 | ...45 | 15 mm polyethylene foam | 65...76 | - | - | - | - | 16 | 10 | 2016, 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra D 105 (2 speed) |
230 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | 0.23 | 78 | - | 50 | 1950 | - | G4 | - | - | - | - | 38 | - | D | - | 1 | 32 | - | - | cross-flow | - | enthalpy | - | - | - | - | - | - | - | - | - | - | 125 | - | -25...+40 | ...45 | 15 mm polyethylene foam | 65...76 | - | - | - | - | 22 | 10 | 2016, 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Ultra D 105 (3 speed) |
230 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | 0.34 | 106 | - | 50 | 2500 | - | G4 | - | - | - | - | 56 | - | D | - | 1 | 41 | - | - | cross-flow | - | enthalpy | - | - | - | - | - | - | - | - | - | - | 125 | - | -25...+40 | ...45 | 15 mm polyethylene foam | 65...76 | - | - | - | - | 29 | 10 | 2016, 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso 315-4Е | 230 | Inline | centrifugal | - | for round air ducts | - | - | - | no | no | yes | - | 2.48 | - | - | 50 | 1325 | - | - | - | 2140 | Exhaust, Supply | 17.0 | 570 | -40 +55 | - | IPX4 | - | 43.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 800-5.1 Pro | 400 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | 810 | - | 50 | 2780 | - | - | - | - | Supply | - | - | - | C | - | 3 | 30 | - | - | - | - | - | 5100 | - | - | - | - | - | 3 | -25...+40 | 7.4 | - | 200 | G4 | - | - | 25 mm mineral wool | - | - | - | - | - | 225 | 52 | 2016, 2018 | - | - | - | - | 193 | 0.84 | - | 5293 | 8.24 | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 550 4Е 50 Hz |
230 | Inline | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 8800 | - | 50 | 1300 | - | - | - | - | Exhaust, Supply | - | 550 | - | - | IPX4 | 1 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 2445 | 13.9 | - | - | - | - | IP24 | - | - | - | - | - | 2.55 | - | - | - | - | - | - | - | - | - | - |
Axis-F 550 4Е 60 Hz |
230 | Inline | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 8970 | - | 60 | 1580 | - | - | - | - | Exhaust, Supply | - | 654 | - | - | IPX4 | 1 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | 2492 | 13.9 | - | - | - | - | IP24 | - | - | - | - | - | 2.88 | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFH 1200 | 200-240 | floor mounting, outdoor mounting | - | - | for round air ducts | - | - | aluzinc | yes | yes | yes | - | - | 1200 | - | 50/60 | 3000 | - | - | - | - | Supply and exhaust | - | 2x610 | - | - | IP34 | 1 | 35 | - | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | 230 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | IP54 | - | - | 5.3 | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
Tower-H EC 630 | 400 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 4.66 | 18270 | - | 50/60 | 1450 | - | - | - | - | Exhaust | - | 2973 | -25...+55 | – | IPX4 | 3 | 71 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5075 | 101 | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Сentro-M EC 160 | 230 | Inline | centrifugal | 160 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 0.90 | 785 | - | 50/60 | 3030 | - | - | - | - | Exhaust, Supply | - | 108 | -25...+60 | B | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 218 | 4.90 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo-BF 35/100 (2 speed) |
220-240 | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.18 | 102 | - | 50 | - | II | - | - | - | Exhaust | - | 44 | +50 | - | IP55 | - | 46 | - | - | - | 3х1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo-BF 35/100 (1 speed) |
220-240 | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.12 | 35 | - | 50 | - | I | - | - | - | Exhaust | - | 15 | +50 | - | IP55 | - | 27 | - | - | - | 3x1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-F 50x25 4E | 230 | Inline | centrifugal | - | for rectangular air ducts | 500 | 250 | galvanized steel | no | no | no | - | 2.49 | 1750 | - | 50 | 1250 | - | - | - | - | Exhaust, Supply | - | 535 | -20...+40 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 486 | 24.0 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LW 700-2 S17 | 230 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 700 | - | 50/60 | 2600 | - | - | - | - | - | - | - | - | A | - | 1 | 52 | - | - | rotary | - | aluminum | - | - | - | - | - | - | - | - | - | - | 250 | - | -25...+40 | - | 20 mm mineral wool | 76–95 | - | - | - | - | 194 | 128 | 2016, 2018 | - | G4 | G4 | - | - | - | - | 315 | 1.4 | - | - | - | - | - | - | - | - | 2 items x 105 | - | - |
Iso-K 400 4D | 400 | Inline | centrifugal | 400 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.25 | - | - | 50 | 1470 | - | - | - | 5098 | Exhaust | - | 785 | -20…+120 | - | IP54 | 3 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 92 | - | 1416 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-B EC 100 | 230 | Inline | centrifugal | 100 | for round air ducts | - | - | galvanized steel | yes | no | yes | - | 0.75 | 278 | - | 50/60 | 3200 | - | - | - | - | Exhaust, Supply | - | 92.7 | - | C | IPX4 | 1 | 32 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | 77 | - | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 250 2Е (50 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.81 | 1450 | - | 50 | 2480 | - | - | - | - | Exhaust | 12.7 | 184 | -25…+50 | - | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 403 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 250 2Е (60 Hz) | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.90 | 1320 | - | 60 | 2320 | - | - | - | - | Exhaust | 12.7 | 232 | -25…+50 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 367 | - | – | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 200 60 Hz | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | plastic | no | no | no | - | 0.58 | 890 | - | 60 | 2765 | - | - | - | - | Exhaust, Supply | - | 132 | -25...+50 | – | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 247 | 3.00 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 200 50 Hz | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | plastic | no | no | no | - | 0.47 | 780 | - | 50 | 2660 | - | - | - | - | Exhaust, Supply | - | 107 | -25...+55 | B | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 217 | 3.00 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
S-Vent 180х74-0.55-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 1.6 | - | - | 50 | 1360 | - | - | - | 1030 | Exhaust, Supply | 13.5 | 550 | 60 | D | IP54 | - | 64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box EC 40x20-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | - | - | - | 810 | - | 50/60 | 2470 | - | - | - | - | Exhaust, Supply | 8.3 | 91 | - | B | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | 225 | - | 2018 | - | - | - | IP55 | - | - | - | - | - | 0.69 | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC LB 300-E S21 | 230 | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | 380 | - | 50/60 | 2100 | - | - | - | - | - | - | - | - | A | - | 1 | 24 | - | - | counter-flow | - | enthalpy | - | - | - | - | - | - | - | - | - | - | 160 | - | -25…+40 | - | 40 mm mineral wool | 74–89 | - | - | - | - | 106 | 63.1 | - | - | G4 | G4, F7 | - | 182 | 1.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V ЕС 500 | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | yes | yes | yes | - | 2.1 | - | - | 50/60 | 1350 | - | - | - | - | Exhaust, Supply | 43.0 | 1320 | -25 +50 | - | IPX4 | 3 | 45 | 10450 | 9928 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
VENTO Ergo A50-1 S Pro (1 speed) |
100-230 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.024 | 21 | - | 50/60 | 610 | - | - | - | - | - | - | 4.5 | - | A | IP24 | - | - | - | - | - | - | - | - | 22 | 13 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
VENTO Ergo A50-1 S Pro (2 speed) |
100-230 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.026 | 32 | - | 50/60 | 800 | - | - | - | - | - | - | 5 | - | A | IP24 | - | - | - | - | - | - | - | - | 29 | 20 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
VENTO Ergo A50-1 S Pro (3 speed) |
100-230 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.039 | 50 | - | 50/60 | 1450 | - | - | - | - | - | - | 7 | - | A | IP24 | - | - | - | - | - | - | - | - | 32 | 23 | 40 | ≤ 88 | - | - | - | - | - | - | - | - | - | - | - | - | 100-230 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Filter replacement indication, Timer, Humidity sensor | - | - | - | - | - |
Iso-Mix 160 min | 230 | Inline | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 0.20 | 410 | - | 50/60 | 1985 | min | - | - | - | Exhaust, Supply | 6.3 | 45 | 60 | C | IPX4 | 1 | 26 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 114 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-Mix 160 max | 230 | Inline | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 0.23 | 550 | - | 50/60 | 2640 | max | - | - | - | Exhaust, Supply | 6.3 | 52 | 60 | C | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 153 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX E 400-2.4 Pro | 230 | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | 425 | - | 50 | 2705 | - | - | - | - | Supply | - | - | - | A | - | 1 | 29 | - | - | - | - | - | 2400 | - | - | - | - | - | 2 | -25...+40 | 10.4 | - | 150 | G4 | - | - | 25 mm mineral wool | - | - | - | - | - | 118 | 50 | 2016, 2018 | - | - | - | - | 98 | 0.43 | - | 2498 | 10.83 | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4D 50 Hz |
400 | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 5280 | - | 50 | 1360 | - | - | - | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 1467 | 9.1 | - | - | - | - | IP44 | - | - | - | - | - | 0.6 | - | - | - | - | - | - | - | - | - | - |
Axis-F 450 4D 60 Hz |
400 | Inline | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 5350 | - | 60 | 1620 | - | - | - | - | Exhaust, Supply | - | 275 | - | - | IPX4 | 3 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | 1486 | 9.1 | - | - | - | - | IP44 | - | - | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFP 2500 | 200-277 | ceiling mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | 2500 | - | 50/60 | 2640 | - | - | - | - | Supply and exhaust | - | 2x740 | - | - | IP34 | 1 | 34 | - | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | 290 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | IP54 | - | - | 3.75 | - | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
Tower-H EC 355 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 9.36 | 3830 | - | 50/60 | 1550 | - | - | - | - | Exhaust | - | 669 | -25...+50 | – | IPX4 | 1 | 51 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1064 | 27 | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-M EC 315 | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | polymer-coated steel | yes | no | no | - | 1.15 | 1370 | - | 50/60 | 2900 | - | - | - | - | Exhaust, Supply | - | 164 | -25...+60 | – | IPX4 | 1 | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 381 | 7.30 | 2018 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Valeo 35/60 (1 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.12 | 35 | 27* | 50 | - | I | - | - | - | Exhaust | - | 15 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 10 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Valeo 35/60 (2 speed) |
- | ceiling mounting, wall mounting | centrifugal | - | for round air ducts | - | - | plastic | no | no | no | - | 0.14 | 63 | 36* | 50 | - | II | - | - | - | Exhaust | - | 25 | +50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | 18 | - | - | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | 3×1.5 | Sound pressure level measured in free space at a distance of 3 meters from the fan | - | - | - |
Box-I EC 50x30-1 max | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 4.20 | - | - | 50/60 | 3100 | - | - | - | 2700 | Exhaust, Supply | 29.0 | 553 | -25...+50 | – | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 750 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC LE 1500-9 S18 | 400 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 1500 | - | 50/60 | 2000 | - | - | - | - | - | - | - | - | - | - | 3 | 62 | - | - | rotary | - | aluminum | 9000 | - | - | - | - | - | - | - | - | - | 315 | - | -25...+40 | - | 25 mm mineral wool | 72–95 | - | - | - | - | 417 | 175 | 2016, 2018 | - | G4 | G4 | - | - | - | - | 9750 | 14.1 | - | - | - | - | - | - | - | - | 2 items x 222 | - | - |
Iso-K 355 4E (50 Hz) | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.11 | - | - | 50 | 1517 | - | - | - | 3545 | Exhaust | - | 393 | -20…+120 | - | IP54 | 1 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 985 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-K 355 4E (60 Hz) | 230 | Inline | centrifugal | 355 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.34 | - | - | 60 | 1705 | - | - | - | 3860 | Exhaust | - | 525 | -20…+120 | - | IP54 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 1072 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
- | 230 | Inline | mixed-flow | 400 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 3.43 | 3610 | - | 50 | 1480 | - | - | - | - | - | 24 | 580 | - | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | 1003 | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-QRA 315 50 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1700 | - | 50 | 1300 | - | - | - | - | Exhaust, Supply | - | 110 | -30 … +40 | - | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.24 | - | - | - | - | IP44 | - | - | - | - | - | 0.75 | - | - | - | - | - | - | - | - | - | - |
Axis-QRA 315 60 Hz |
220-240 | wall mounting | axial | 315 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 1650 | - | 60 | 1365 | - | - | - | - | Exhaust, Supply | - | 104 | -30 … +40 | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5.24 | - | - | - | - | IP44 | - | - | - | - | - | 0.7 | - | - | - | - | - | - | - | - | - | - |
Centro 125 60 Hz | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | plastic | no | no | no | - | 0.35 | 370 | - | 60 | 2830 | - | - | - | - | Exhaust, Supply | - | 81 | -25...+50 | – | IPX4 | 1 | 41 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 103 | 2.20 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro 125 50 Hz | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | plastic | no | no | no | - | 0.34 | 355 | - | 50 | 2800 | - | - | - | - | Exhaust, Supply | - | 79 | -25...+55 | B | IPX4 | 1 | 40 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 99 | 2.20 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x35 4E 50 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 2.37 | 2950 | - | 50 | 1370 | - | - | - | - | Exhaust, Supply | 56.2 | 470 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40…+80 | - | - | - | - | - | - | - | 820 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I 60x35 4E 60 Hz |
230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 3.15 | 3515 | - | 60 | 1460 | - | - | - | - | Exhaust, Supply | 56.2 | 700 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40…+55 | - | - | - | - | - | - | - | 976 | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Helix 160х90 2E | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | - | no | yes | no | - | 1.48 | - | - | 50 | 2745 | - | - | - | 730 | Exhaust, Supply | 5.1 | 320 | -25 +45 | C | IPX4 | - | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Δ) 50 Hz |
400 (Δ) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 1.41 | 2970 | - | 50 | 1415 | - | - | - | - | Exhaust, Supply | 36.38 | 510 | - | - | IPX4 | 3 | 64 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+60 | - | - | - | - | - | - | - | 825 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Y) 50 Hz |
400 (Y) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 0.7 | 2660 | - | 50 | 1235 | - | - | - | - | Exhaust, Supply | 36.38 | 380 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+80 | - | - | - | - | - | - | - | 739 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Δ) 60 Hz |
400 (Δ) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 1.44 | 3410 | - | 60 | 1610 | - | - | - | - | Exhaust, Supply | 36.38 | 750 | - | - | IPX4 | 3 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+60 | - | - | - | - | - | - | - | 947 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box 60x35 4D 400 (Y) 60 Hz |
400 (Y) | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | - | - | - | - | 0.93 | 2730 | - | 60 | 1220 | - | - | - | - | Exhaust, Supply | 36.38 | 515 | - | - | IPX4 | 3 | 50 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -40...+40 | - | - | - | - | - | - | - | 758 | - | 2016, 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT LE 2200-18 | 400 | ceiling mounting, wall mounting, floor mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 2200 | - | 50/60 | 1150 | - | - | 77 | - | - | - | - | - | NRVU | - | 3 | 65 | - | - | cross-flow | - | polystyrene | 18000 | - | - | - | - | - | - | - | 26 | 31.7 | 315 | - | -25...+40 | - | 25 mm mineral wool | - | 19300 | - | - | - | 611 | 96 | - | - | G4 | G4 | - | 1300 | 5.7 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V 710 6D | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | no | yes | yes | - | 3.90 | - | - | 50/60 | 890 | - | - | - | - | Exhaust, Supply | 136.0 | 2000 | -20 +40 | - | IPX4 | 3 | 59 | 15830 | 14880 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Freshbox 100 Speed I |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 30 | - | 50/60 | 2200 | I | - | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | 100 | - | -15...+40 | - | - | 98 | - | - | - | 10 | 8 | - | - | - | G4 | - | - | 12 | 0.4 | - | - | - | - | - | 13 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | |
Freshbox 100 Speed II |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 60 | - | 50/60 | 2200 | II | - | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | 100 | - | -15...+40 | - | - | 92 | - | - | - | 10 | 17 | - | - | - | G4 | - | - | 21 | 0.4 | - | - | - | - | - | 27 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | |
Freshbox 100 Speed III |
110-240 | wall mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 100 | - | 50/60 | 2200 | III | - | - | - | - | 31 | - | - | A | - | 1 | - | - | - | counter-flow | - | polystyrene | - | - | - | - | - | - | - | - | - | - | 100 | - | -15...+40 | - | - | 89 | - | - | - | 10 | 28 | - | - | - | G4 | - | - | 45 | 0.4 | - | - | - | - | - | 39 | - | LCD | Filter replacement indication, Timer, Weekly schedule | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - | |
Axis-Q 710 6D | 400 | wall mounting | axial | 710 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 15440 | - | 50 | 830 | - | - | - | - | Exhaust, Supply | - | 1150 | - | - | IPX4 | 3 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | 4289 | 33.0 | - | - | - | - | IP54 | - | - | - | - | - | 2.0 | - | - | - | - | - | - | - | - | - | - |
Box-FI 60x35 4D | 400 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | yes | - | 3.93 | 5020 | - | 50 | 1300 | - | - | - | - | Exhaust, Supply | - | 2460 | - | - | IPX4 | 3 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+40 | - | - | - | - | - | - | - | 1395 | 72 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V EC 190 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 0.77 | 670 | - | 50/60 | 3520 | - | - | - | - | Exhaust | - | 102 | -25...+60 | B | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 186 | 7 | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 200 V2 (1 speed) | 1 ~ 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.45 | - | - | 50 | 770 | - | - | - | 460 | Exhaust, Supply | 8.8 | 103 | 50 | C | IPX4 | - | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 128 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-R 200 V2 (2 speed) | 1 ~ 230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | 0.63 | - | - | 50 | 1200 | - | - | - | 752 | Exhaust, Supply | 8.8 | 142 | 50 | C | IPX4 | - | 48 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 209 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC DE 2000-12 R | 400 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 2000 | - | 50/60 | 2920 | - | - | - | - | - | - | - | - | NRVU | - | 3 | 58 | - | - | cross-flow | - | aluminum | 12000 | - | - | - | - | - | - | - | - | - | 315 | - | -25…+40 | - | 25 mm mineral wool | 75 | - | - | - | - | 556 | 190 | 2016 | - | G4 | G4 | - | 840 | 5 | - | 12870 | 22.4 | - | - | - | 17.4 | - | - | - | - | - | - | - |
KOMFORT EC DE 4000-21 R | 400 | ceiling mounting | - | - | - | - | - | aluzinc | - | - | - | - | - | 4000 | - | 50/60 | 2580 | - | - | - | - | - | - | - | - | NRVU | - | 3 | 59 | - | - | cross-flow | - | aluminum | 21000 | - | - | - | - | - | - | - | - | - | 400 | - | -25…+40 | - | 25 mm mineral wool | 75 | - | - | - | - | 1111 | 290 | 2016 | - | G4 | G4 | - | 1980 | 3.4 | - | 23000 | 33.4 | - | - | - | 30.0 | - | - | - | - | - | - | - |
S-Vent 250х127-5.5-2D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 10.7 | - | - | 50 | 2850 | - | - | - | 4820 | Exhaust, Supply | 40 | 5500 | 60 | - | IP54 | - | 81 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |