Mode | Voltage | Mounting | Design | Connection diameter | Air duct | Width | Height | Casing material | EC motor | Outdoor mounting | Sound-insulated casing | Heating | Current | Maximum air flow | Frequency | RPM | Speed | Heat recovery efficiency | Maximum air capacity | Type | Weight | Power | Max. operating temperature | SEC class | Ingress protection rating | Phase | Sound pressure level at 3 m | Max. air flow at air flow direction (perpendicular air flow) | Max. air flow at air flow direction (direct air flow) | Heat exchanger type | Heat exchanger material | Electric heater power | Sound pressure level at 1 m | Sound pressure level at 3 m | Outdoor sound pressure attenuation | Regeneration efficiency | Insulation class | Transported air temperature | Electric heater current | Current | Connected air duct diameter | Connected air duct size | Transported air temperature | Number of water coil rows | Insulation | Heat recovery efficiency | Total unit power | Sound pressure level at a distance of 1 m | Voltage | Max. unit power without an electric heater | Reheater power consumption | Maximum air flow | SFP | Weight | ErP | Maximum air flow | Extract filter | Supply filter | Motor IP rating | Max. power without electric heater | Max. unit power | Max. unit current without electric heater | Max. unit current | Max. unit power with electric heater | Max. unit current with electric heater | Current | Preheater power consumption | Electric heater current | Remote control panel | Functions | Max. power of electric heater | Max. unit current of electric heater | * | Motor max. power | Perm. amb. temp. |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Axis-F 350 4Е 50 Hz |
230 | Inline | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 2500 | 50 | 1380 | - | - | - | Exhaust, Supply | - | 140 | - | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | 695 | - | 7.7 | - | - | - | - | IP24 | - | - | - | - | - | - | 0.65 | - | - | - | - | - | - | - | - | - |
Axis-F 350 4Е 60 Hz |
230 | Inline | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 2650 | 60 | 1700 | - | - | - | Exhaust, Supply | - | 147 | - | - | IPX4 | 1 | 47 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | 736 | - | 7.7 | - | - | - | - | IP24 | - | - | - | - | - | - | 0.66 | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D650 S17 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | 710 | 50/60 | 3600 | - | - | - | - | - | - | - | A | - | 1 | 36 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | 200 | - | -25...+40 | - | 40 mm mineral wool | 80–87 | - | - | - | - | - | 197 | - | 102 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | 367 | 367 | 2.5 | 2.5 | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H EC 250 | 230 | for roof | centrifugal | - | for round air ducts, for square air ducts | - | - | polymer-coated steel | yes | yes | no | - | 1.29 | 1470 | 50/60 | 3300 | - | - | - | Exhaust | - | 161 | -25...+60 | – | IPX4 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 408 | - | 13 | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFV 5000 | 380-480 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | 5000 | 50/60 | 1350 | - | - | - | Supply and exhaust | - | 2x1320 | - | - | IP34 | 3 | 32 | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | 715 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | IP54 | - | - | - | 4.25 | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
S-Vent 500х229-11.0-4D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 24 | - | 50 | 1450 | - | - | 17250 | Exhaust, Supply | 107 | 11000 | 60 | - | IP54 | - | 85 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 80x50-3 | 400 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 2.01 | - | 50/60 | 1470 | - | - | 8395 | Exhaust, Supply | 108.4 | 2025 | -25...+50 | – | IPX4 | 3 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 2332 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC S6EK 200 S21 | 230 | - | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | 270 | 50/60 | 1800 | - | - | - | - | - | - | - | A | - | 1 | 28 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | 125 | - | -25...+40 | - | 20 mm mineral wool | 75–92 | - | - | - | - | - | 75 | - | 48 | 2016, 2018 | - | G4 | G4, F7 | - | 118 | 818 | 1.0 | 4.0 | - | - | - | - | - | - | - | 700 | 3.0 | - | - | - |
KOMFORT Roto EC LE 1000-4.5 S17 | 400 | - | - | - | - | - | - | aluzinc | - | - | - | - | - | 900 | 50/60 | 2600 | - | - | - | - | - | - | - | A | - | 3 | 58 | - | - | rotary | aluminum | 4500 | - | - | - | - | - | - | - | - | 250 | - | -25...+40 | - | 20 mm mineral wool | 72–95 | - | - | - | - | - | 250 | - | 130 | 2016, 2018 | - | G4 | G4 | - | - | - | - | - | 4940 | 7.2 | - | - | - | - | - | - | - | - | 2 items x 135 | - |
Iso-K 315 2D (50 Hz) | 400 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 2.80 | - | 50 | 3025 | - | - | 4710 | Exhaust | - | 1225 | -20…+120 | - | IP54 | 3 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 1308 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-K 315 2D (60 Hz) | 400 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 3.40 | - | 60 | 3328 | - | - | 5290 | Exhaust | - | 2011 | -20…+120 | - | IP54 | 3 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 60 | - | 1470 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LB 300-E S14 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 320 | 50/60 | 2150 | - | - | - | Supply and exhaust | 136±3% | - | - | A | - | 1 | 21 | - | - | counter-flow | enthalpy | - | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | 40 mm mineral wool | 73...89* | - | 31 | - | 125 | - | 89 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | 0.9 | - | - | 0.9 | - | - | - | Sensor | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - |
Axis-QRA 150 50 Hz |
220-240 | wall mounting | axial | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 200 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 36 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 56 | - | 1.91 | - | - | - | - | IP44 | - | - | - | - | - | - | 0.26 | - | - | - | - | - | - | - | - | - |
Axis-QRA 150 60 Hz |
220-240 | wall mounting | axial | 150 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 205 | 60 | 1590 | - | - | - | Exhaust, Supply | - | 26 | -30 … +40 | - | IPX4 | 1 | 33 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 57 | - | 1.91 | - | - | - | - | IP44 | - | - | - | - | - | - | 0.26 | - | - | - | - | - | - | - | - | - |
Iso-Mix-E 355-4D | 400 | Inline | mixed-flow | 355 | for round air ducts | - | - | polymer-coated steel | no | no | yes | - | 1.77 | 3430 | 50 | 1490 | - | - | - | Exhaust, Supply | 33 | 585 | - | - | IPX4 | 3 | 49 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | 953 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-V 500 4D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 2.64 | 8435 | 50 | 1460 | - | - | - | Exhaust | 52 | 1527 | -30…+50 | - | IPX4 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2343 | - | - | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-MZ 100 L 50 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | - | 0.19 | 230 | 50 | 2732 | - | - | - | Exhaust, Supply | 2.5 | 42 | - | C | IPX4 | - | 35 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+55 | - | - | - | - | - | - | - | - | 64 | - | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Centro-MZ 100 L 60 Hz |
230 | ceiling mounting, wall mounting | centrifugal | 100 | for round air ducts | - | - | galvanized steel | no | no | no | - | 0.23 | 250 | 60 | 3258 | - | - | - | Exhaust, Supply | 2.5 | 51 | - | C | IPX4 | - | 36 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+50 | - | - | - | - | - | - | - | - | 69 | - | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC SB 250 S21 | 230 | wall mounting, floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | - | - | 290 | 50/60 | 2050 | - | - | - | - | - | 115 | - | A+ | - | 1 | 25 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | - | - | - | 160 | - | -25...+40 | - | 30 mm mineral wool | 85...94 | - | - | - | - | - | 81 | - | 51 | 2016, 2018 | - | G4 | G4, F7 | - | - | - | - | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - |
VENTO A50-1 S (1 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.021 | 26 | 50 | 599 | - | - | - | - | - | 3.68 | - | A | IP24 | - | - | - | - | - | - | - | 24 | 14 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - |
VENTO A50-1 S (2 speed) | 220-240 | wall mounting | - | - | 150 | - | - | - | - | - | - | - | 0.026 | 53 | 50 | 1155 | - | - | - | - | - | 4.83 | - | A | IP24 | - | - | - | - | - | - | - | 34 | 24 | 18 | ≤ 90 | - | - | - | - | - | - | - | - | - | - | - | - | 220-240 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Mechanical | - | - | - | - | - | - |
Box-F 60x35 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | no | - | 1.47 | 3310 | 50 | 940 | - | - | - | Exhaust, Supply | - | 743 | -20...+70 | - | IPX4 | 3 | 55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 920 | - | 49.5 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 50 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 800 | 50 | 1380 | - | - | - | Exhaust, Supply | - | 50 | - | - | IPX4 | 1 | 38 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | 222 | - | 4.0 | - | - | - | - | IP24 | - | - | - | - | - | - | 0.22 | - | - | - | - | - | - | - | - | - |
Axis-F 250 4Е 60 Hz |
230 | Inline | axial | 250 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 865 | 60 | 1730 | - | - | - | Exhaust, Supply | - | 56 | - | - | IPX4 | 1 | 39 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | 240 | - | 4.0 | - | - | - | - | IP24 | - | - | - | - | - | - | 0.24 | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D250 S18 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | 310 | 50/60 | 2200 | - | - | - | - | - | - | - | A | - | 1 | 21 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | 160 | - | -25...+40 | - | 40 mm mineral wool | 71–87 | - | - | - | - | - | 86 | - | 55 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | 135 | 135 | 1.0 | 1.0 | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 560 6E | 230 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 2.70 | 9560 | 50 | 930 | - | - | - | Exhaust | 76.4 | 613 | -25…+50 | - | IPX4 | 1 | 58 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2656 | - | - | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFH 9000 | 380-480 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | 9000 | 50/60 | 1700 | - | - | - | Supply and exhaust | - | 2x2650 | - | - | IP34 | 3 | 32 | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | 1400 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | IP54 | - | - | - | 8.5 | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
S-Vent 400х183-2.2-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 5.8 | - | 50 | 940 | - | - | 8100 | Exhaust, Supply | 54.1 | 2200 | 60 | - | IP54 | - | 73 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 60x30-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 2.45 | - | 50/60 | 2000 | - | - | 2545 | Exhaust, Supply | 52.9 | 326 | -25...+50 | – | IPX4 | 1 | 34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 707 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 60x35 6E | 230 | Inline | centrifugal | - | for rectangular air ducts | 600 | 350 | galvanized steel | no | no | yes | - | 3.6 | 2755 | 50 | 820 | - | - | - | Exhaust, Supply | - | 720 | - | - | IPX4 | 1 | 43 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+60 | - | - | - | - | - | - | - | - | 765 | - | 72 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC LBE 700 S21 | 230 | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | 830 | 50/60 | 3200 | - | - | - | - | - | - | - | A+ | - | 1 | 31 | - | - | counter-flow | polystyrene | 3600 | - | - | - | - | - | - | - | - | 250 | - | -25…+40 | - | 40 mm mineral wool | 80–98 | - | - | - | - | - | 231 | - | 108.4 | - | - | G4 | G4, F7 | - | 336 | - | 2.4 | - | 3936 | 18.0 | - | - | 15.6 | - | - | - | - | - | - | - |
Iso-K 200 4Е | 230 | Inline | centrifugal | 200 | for round air ducts | - | - | galvanized steel | no | yes | yes | - | 3.0 | - | 50 | 1475 | - | - | 1600 | Exhaust | - | 550 | -20…+120 | - | IP54 | 1 | 45 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 25.0 | - | 444 | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LB 500 S21 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | without heating | - | 580 | 50/60 | 1280 | - | - | - | Supply and exhaust | 191±3% | - | - | A | - | 1 | 25 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | -25...+40 | - | - | 250 | - | - | - | 40 mm mineral wool | 75...94* | - | 35 | - | 230 | - | 161 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | 1.7 | - | - | 1.7 | - | - | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - |
Axis-QR 350 4D 50 Hz |
400 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 2350 | 50 | 1419 | - | - | - | Exhaust, Supply | - | 140 | - | - | IPX4 | 3 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | 653 | - | 7.5 | - | - | - | - | IP54 | - | - | - | - | - | - | 0.38 | - | - | - | - | - | - | - | - | - |
Axis-QR 350 4D 60 Hz |
400 | wall mounting | axial | 350 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 2660 | 60 | 1638 | - | - | - | Exhaust, Supply | - | 150 | - | - | IPX4 | 3 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | 739 | - | 7.5 | - | - | - | - | IP54 | - | - | - | - | - | - | 0.46 | - | - | - | - | - | - | - | - | - |
Iso-B EC 315 | 230 | Inline | centrifugal | 315 | for round air ducts | - | - | galvanized steel | yes | no | yes | - | 1.35 | 1260 | 50/60 | 2620 | - | - | - | Exhaust, Supply | - | 164.3 | - | – | IPX4 | 1 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | 350 | - | - | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Helix 160х62 2E | 230 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 1.17 | 560 | 50 | 2630 | - | - | - | Exhaust, Supply | 4.8 | 264 | -25 +50 | C | IPX4 | - | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 156 | - | - | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Extero 200 50 Hz |
230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.42 | 700 | 50 | 2515 | - | - | - | Exhaust | - | 96 | +55 | B | IPX4 | 1 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 194 | - | 4.5 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Extero 200 60 Hz |
230 | Inline | centrifugal | 200 | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.42 | 710 | 60 | 2555 | - | - | - | Exhaust | - | 97 | +55 | B | IPX4 | 1 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 197 | - | 4.5 | 2018 | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC D2 350 L/R S21 | 230 | ceiling mounting, wall mounting | - | - | - | - | - | galvanized steel | yes | no | yes | - | - | 400 | 50/60 | 3200 | - | - | - | - | - | - | - | A | - | 1 | 33 | - | - | rotary | aluminum | - | - | - | - | - | - | - | - | - | 160 | - | -25...+40 | - | 20 mm mineral wool | 73–87 | - | - | - | - | - | 111 | - | 78 | 2016, 2018 | - | G4 | G4, F7 (Option: H13) | - | 200 | 200 | 1.3 | 1.3 | - | - | - | - | - | - | - | - | - | Heat recovery efficiency is specified in compliance with EN 13141-7. | - | - |
KOMFORT L 600 | 230 | ceiling mounting, wall mounting, floor mounting | - | - | for round air ducts | - | - | aluzinc | no | no | yes | - | - | 600 | 50/60 | 1350 | - | 85 | - | Supply and exhaust | - | - | - | E | - | 1 | 32-48 | - | - | cross-flow | polystyrene | - | - | - | - | - | - | - | - | 1.72 | 200 | - | -25...+40 | - | 25 mm mineral wool | - | 390 | - | - | - | - | 167 | - | 54 | 2016 | - | G4 | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Iso-V 450 4D | 400 | Inline | centrifugal | - | for round air ducts | - | - | - | no | yes | yes | - | 1.50 | - | 50/60 | 1350 | - | - | - | Exhaust, Supply | 43.0 | 740 | -40 +80 | - | IPX4 | 3 | 54 | 5700 | 5080 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BLAUBOX MW 3000-4 Pro | 400 (Y) | ceiling mounting, wall mounting, floor mounting | centrifugal | - | for rectangular air ducts | - | - | aluzinc | no | no | yes | - | - | 3000 | 50 | 1200 | - | - | - | Exhaust | - | - | - | - | - | 3 | 53 | - | - | - | - | - | - | - | - | - | - | -40...+45 | - | 2.3 | - | 600х300 | - | 4 | 25 mm mineral wool | - | 1270 | - | - | - | - | 833 | - | 73.2 | 2016, 2018 | - | - | G4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Axis-Q 450 4Е 50 Hz |
230 | wall mounting | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 4680 | 50 | 1350 | - | - | - | Exhaust, Supply | - | 250 | - | - | IPX4 | 1 | 56 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | 1300 | - | 10.5 | - | - | - | - | IP54 | - | - | - | - | - | - | 1.2 | - | - | - | - | - | - | - | - | - |
Axis-Q 450 4Е 60 Hz |
230 | wall mounting | axial | 450 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 4790 | 60 | 1600 | - | - | - | Exhaust, Supply | - | 325 | - | - | IPX4 | 1 | 57 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | 1331 | - | 10.5 | - | - | - | - | IP54 | - | - | - | - | - | - | 1.46 | - | - | - | - | - | - | - | - | - |
KOMFORT Roto EC DE250 S18 | 230 | - | - | - | - | - | - | painted steel | - | - | - | - | - | 310 | 50/60 | 2200 | - | - | - | - | - | - | - | A | - | 1 | 21 | - | - | rotary | aluminum | - | - | - | - | - | - | - | 3.1 | - | 160 | - | -25...+40 | - | 40 mm mineral wool | 71–87 | - | - | - | - | 700 | 86 | - | 56 | 2016, 2018 | - | G4 | G4 + F7 (Option: H13) | - | 135 | 835 | 1.0 | 4.1 | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-H 500 4D | 400 | for roof | centrifugal | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 2.64 | 8435 | 50 | 1460 | - | - | - | Exhaust | 46.6 | 1527 | -30…+50 | - | IPX4 | 3 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2343 | - | - | 2018 | - | - | - | IP54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
BlauAIR CFH 1500 | 200-240 | floor mounting, outdoor mounting | - | - | for rectangular air ducts | - | - | aluzinc | yes | yes | yes | - | - | 1500 | 50/60 | 3000 | - | - | - | Supply and exhaust | - | 2x610 | - | - | IP34 | 1 | 37 | - | - | - | - | - | - | - | - | - | F | - | - | - | - | - | -25...+40 | - | - | - | - | - | - | - | - | - | - | 295 | - | - | ePM1 55% | ePM1 55% (ISO 16890)-F7 (EN779) | IP54 | - | - | - | 5.3 | - | - | - | - | - | - | - | - | - | - | - | -35...+50 |
S-Vent 315x143-2.2-6D | 400 | floor mounting | centrifugal | - | for rectangular air ducts, for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 5.6 | - | 50 | 940 | - | - | 4375 | Exhaust, Supply | 46.8 | 2200 | 60 | - | IP54 | - | 70 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-I EC 30x15-1 | 230 | Inline | centrifugal | - | for rectangular air ducts | - | - | galvanized steel | yes | no | yes | - | 0.73 | - | 50/60 | 3300 | - | - | 565 | Exhaust, Supply | 10.3 | 97 | -25...+50 | B | IPX4 | 1 | 29 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2018 | 157 | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-FI 50x30 6D | 400 | Inline | centrifugal | - | for rectangular air ducts | 500 | 300 | galvanized steel | no | no | yes | - | 0.8 | 1620 | 50 | 910 | - | - | - | Exhaust, Supply | - | 303 | - | - | IPX4 | 3 | 42 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -20...+60 | - | - | - | - | - | - | - | - | 450 | - | 52.5 | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
KOMFORT EC LBE 700-E S21 | 230 | ceiling mounting, floor mounting | - | - | - | - | - | galvanized steel | - | - | - | - | - | 830 | 50/60 | 3200 | - | - | - | - | - | - | - | A | - | 1 | 31 | - | - | counter-flow | enthalpy | 3600 | - | - | - | - | - | - | - | - | 250 | - | -25…+40 | - | 40 mm mineral wool | 74–89 | - | - | - | - | - | 231 | - | 108.4 | - | - | G4 | G4, F7 | - | 336 | - | 2.4 | - | 3936 | 18.0 | - | - | 15.6 | - | - | - | - | - | - | - |
Iso-ZS 250 4E max | 230 | - | centrifugal | - | for round air ducts | - | - | galvanized steel | no | no | yes | - | 2.69 | - | 50 | 1465 | - | - | 2470 | Exhaust, Supply | 31.3 | 617 | -20…+50 | - | IPX4 | 1 | 46 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | – | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
CIVIC EC LBE 300 S21 | 230 | floor mounting | - | - | - | - | - | polymer-coated steel | yes | - | - | electric preheating | - | 320 | 50/60 | 2150 | - | - | - | Supply and exhaust | 139±3% | - | - | A | - | 1 | 21 | - | - | counter-flow | polystyrene | - | - | - | - | - | - | -25...+40 | - | - | 200 | - | - | - | 40 mm mineral wool | 78...92* | - | 31 | - | 125 | - | 89 | - | - | - | - | G4 x 2 | G4 + F8 (option: F8 C + H11) | - | - | - | 0.9 | - | - | 7 | - | 1400 | - | Sensor, LCD | Filter replacement indication, Timer, Weekly schedule, External sensor connection | - | - | Heat recovery efficiency is specified in compliance with EN 13141-8 | - | - |
Axis-QR 550 4Е 50 Hz |
230 | wall mounting | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 8800 | 50 | 1300 | - | - | - | Exhaust, Supply | - | 550 | - | - | IPX4 | 1 | 62 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+60 | - | - | - | - | - | - | - | - | 2445 | - | 16.5 | - | - | - | - | IP24 | - | - | - | - | - | - | 2.55 | - | - | - | - | - | - | - | - | - |
Axis-QR 550 4Е 60 Hz |
230 | wall mounting | axial | 550 | for round air ducts | - | - | polymer-coated steel | no | no | no | - | - | 8970 | 60 | 1580 | - | - | - | Exhaust, Supply | - | 654 | - | - | IPX4 | 1 | 63 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -30...+50 | - | - | - | - | - | - | - | - | 2492 | - | 16.5 | - | - | - | - | IP24 | - | - | - | - | - | - | 2.88 | - | - | - | - | - | - | - | - | - |
Iso-B EC 125 | 230 | Inline | centrifugal | 125 | for round air ducts | - | - | galvanized steel | yes | no | yes | - | 0.75 | 357 | 50/60 | 3200 | - | - | - | Exhaust, Supply | - | 92.6 | - | C | IPX4 | 1 | 34 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | -25...+60 | - | - | - | - | - | - | - | - | 99 | - | - | 2018 | - | - | - | IP55 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (60 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.7 | 1650 | 60 | 1365 | - | - | - | Exhaust | 11.5 | 104 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 458 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tower-AL 315 (50 Hz) | 230 | for roof | axial | - | for round air ducts | - | - | polymer-coated steel | no | yes | no | - | 0.75 | 1700 | 50 | 1300 | - | - | - | Exhaust | 11.5 | 110 | 40 | C | IP24 | 1 | 54 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 472 | - | - | - | - | - | - | IP44 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-D 150 (50 Hz) | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | galvanized steel | no | no | no | - | 0.5 | - | 50 | 2465 | - | - | 485 | Exhaust | 6.5 | 112 | -25 +50 | - | IPX4 | 1 | 52 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Box-D 150 (60 Hz) | 230 | Inline | centrifugal | 150 | for round air ducts | - | - | galvanized steel | no | no | no | - | 0.6 | - | 60 | 2550 | - | - | 531 | Exhaust | 6.5 | 136 | -25 +50 | - | IPX4 | 1 | 53 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Solo A35 L S4 Pro R (1 speed) |
- | - | - | - | - | - | - | - | - | - | - | - | - | 30 | - | - | I | - | - | - | - | 1.36 | - | - | IP24 | - | 27 | - | - | сeramic | - | - | - | - | - | - | - | - | - | - | - | - | -15...+40 | - | - | ≤85 | - | - | 230 | - | - | 8 | 0.33 | - | - | - | - | - | - | - | - | - | - | - | - | 0.031 | - | - | - | - | - | - | - | - | - |
Solo A35 L S4 Pro R (2 speed) |
- | - | - | - | - | - | - | - | - | - | - | - | - | 46 | - | - | II | - | - | - | - | 1.89 | - | - | IP24 | - | 32 | - | - | сeramic | - | - | - | - | - | - | - | - | - | - | - | - | -15...+40 | - | - | ≤85 | - | - | 230 | - | - | 13 | 0.30 | - | - | - | - | - | - | - | - | - | - | - | - | 0.034 | - | - | - | - | - | - | - | - | - |